Panasonic KX-NS700 - Transferring to an Outside Party Using the Sip Service

• * For SIP phone users, instead of going on-hook, if you press the TRANSFER button
(KX-UT series [except KX-UT670]), Transfer Cancel button (KX-UT670) once, or the
HOLD button (non-KX-UT series) once or twice (depending on the telephone being
used), you can return to the held call. The call with the transferred party will be
disconnected.
• Time limit
Both the caller and the transferred party will hear an alarm tone fifteen seconds before
a specified time period, and the call will be disconnected.
• To return to the held call before the destination answers, press the TRANSFER
button, corresponding CO, ICD Group, INTERCOM, or DN button, or the hookswitch.
Customizing Your Phone
• 3.1.4 Customizing the Buttons
Create or edit a Direct Station Selection (DSS) button.
Transferring to an Outside Party Using the SIP Service
To transfer a call with announcement (Attended Transfer)
On-hook.Talk.
Seize CO line.
During a conversation
PT/PS
Press TRANSFER. Dial outside phone
number.
CO line
outside
phone no.
TRANSFER
C.Tone
On-hook.Talk.
Seize CO line.
During a conversation
SIP-Extn.
Press TRANSFER. Dial outside phone
number.
CO line
outside
phone no.
C.Tone
KX-UT series only.
54 Operating Manual Document Version 2014-11
1.3.11 Call Transfer