1.3.15 Conference
– Conference
–
Leaving Three-party Conference
Conference
You can add one or more parties to your conversation.
• For KX-UT133/KX-UT136/KX-UT248/KX-UT670 SIP phone users:
When you press the CONFERENCE/CONF/Conference button for the first time to
establish a conference call, the DN/S-CO button for the call will turn off and a new DN
button will light green for the conference call. Even if you add more parties, only the
newly lit DN button is lit up for the call.
To establish a conference call
Press CONF.Dial desired
phone number.
Seize a CO line before dialing
an outside phone number.
PT/PS
Talk with
multiple parties.
During a conversation
desired
phone no.
Talk to the
new party.
Press CONF
or TRANSFER.
OR
C.ToneC.Tone
Press CONFERENCE. Press CONFERENCE.Dial desired phone
number.
Seize a CO line before dialing
an outside phone number.
KX-UT series
Talk with multiple
parties.
During a conversation
desired
phone no.
Talk to the
new party.
C.Tone
C.Tone
For KX-UT670:
Press Start Conference.
66 Operating Manual Document Version 2014-11
1.3.15 Conference
To Next Page
Loading...
