PT/SLT/PS/SIP Extn.
Enter 421.
On-hook.
Enter the desired password and #.
Enter 2 to accept.
2
your desired password
Log in to your mailbox.
2 14 #
CAUTION
• It is strongly recommended that a password of 16 numbers be used for maximum
protection against unauthorised access.
• To
avoid unauthorised access to the PBX, keep the password secret. If it becomes known
to others, the PBX may be misused.
• Change the password periodically.
Changing or Deleting Your Subscriber (Owner) Name
You can record your name in the Unified Messaging system. The system can then announce your name for
callers to let them know that they have reached the correct mailbox.
To change/delete your subscriber name
PT/SLT/PS/SIP Extn.
Enter 431.
On-hook.
Enter 2 to accept.
2
Log in to your mailbox.
3 14
Enter 1 to end recording.
1
Enter 433 to delete your subscriber name,
then go on-hook to finish.
State your name.
C.Tone
Common Service Commands and Navigation Commands
Commands for Changing the Current Unified Messaging System Service
After going off-hook and pressing the MESSAGE button
*1
, Voice Mail Transfer button, or enter the UM
group’s floating extension number, you can enter a service command to access certain Unified Messaging
system
features quickly. While guidance is being provided, you can also use service commands to, for example,
switch to a different Unified Messaging system service mode.
*1
For KX-UT series SIP phone users: When using the MESSAGE button, please press the MESSAGE button before going off-hook.
User Manual 149
1.8.2 Logging in to and Configuring Your Mailbox
To Next Page
Loading...
