• For KX-NT300 series (except KX
-NT321)/KX-NT560/KX-DT343/KX-DT346/KX-UT248
telephone users:
– With KX-NT300 series (except KX-NT321)/KX-NT560/KX-DT343/KX-DT346/KX-UT248
telephones, you can use a Bluetooth wireless headset registered on your extension as
a headset.
– Operating Distance
Please keep the telephones with connected Bluetooth Modules, 3 m or more apart from
each other. Also, if a Bluetooth headset is in use near a telephone with a connected
Bluetooth Module, other than the one it is registered to, noise may be heard. Move away
from the telephone and closer to the one it is registered to, to improve the signal.
– Noise
Signals are transmitted between this module and the Bluetooth headset using radio
waves. For maximum distance and noise free operation, it is recommended that the
module is situated away from electrical appliances such as faxes, radios, PCs, or
microwaves.
• Systems using the 2.4 GHz ISM (Industrial, Scientific and Medical) band may interfere
with this product. Examples of such systems are cordless telephones, wireless LAN,
Home RF, microwave ovens and other ISM devices. These systems may cause minor
noise.
• For KX-UT248 and KX-NT560 users:
– You
may not be able to use all of the functionality available on a Bluetooth headset. For
example, redialling will not work with a REDIAL button on a Bluetooth headset, and,
during hands-free mode, you cannot switch the call to the Bluetooth headset through
headset operation.
• For
KX-NT500 series (except KX-NT551), KX-DT543, KX-DT546, KX-UT133, KX-UT136,
KX-UT248, and KX-UT670 telephone users:
– You can use Electric Hook Switch (EHS) headsets. For the latest information about
headsets that have been tested with this unit, consult your dealer.
Customising Your Phone
• 3.1.2 Settings on the Programming Mode
—Headset Operation
Select the equipment to use.
• 3.1.3 Customising the Buttons
Create or edit a Headset button.
User Manual 99
1.4.8 Using the Headset (Headset Operation)
To Next Page
Loading...
