Panasonic KX-NT400 - Page 140

Button Description & Programming Input
System Alarm
Used to confirm a PBX error.
Programming Input
Time Service (Day/Night/
Lunch/Break)
Used to switch the time service mode.
Programming Input
+ 0/1/2/3
*4
(+ + Tenant no.)
The Time Service (Day/Night/Lunch/Break) button light shows the
current status as follows:
• Off: Day mode
• Green on: Lunch mode
• Flashing green: Break mode
• Red on: Night mode
• Flashing red: Holiday mode
Answer
Used to answer an incoming call.
Programming Input
Release
Used to disconnect the line during or after a conversation or to
complete a Call Transfer.
Programming Input
Toll Restriction
Used to change the toll restriction level of other extension users
temporarily.
Programming Input
+ Toll Restriction Level (1–7)
Calling Line Identification
Restriction (CLIR)
Used to switch between the CLIP and CLIR services.
Programming Input
You can change the mode by pressing a preset CLIR button while
on-hook.
The CLIR button light shows the current status as follows:
• Off: shows your telephone number.
• Red on: prevents your telephone number being displayed.
140 Operating Instructions Document Version 2010-01
Customizing the Telephone