G CONF/STORE (KX-NT511 only): Used to establish a multiple
party conversation or store programme changes.
CONF (KX-NT551/KX-NT553/KX-NT556 only): Used to
establish a multiple party conversation.
H
MESSAGE
*2
: Used to leave a message waiting indication or
call back the party who left the message waiting indication.
I FLASH/RECALL: Used to disconnect the current call and
make another call without hanging up.
J REDIAL: Used to redial the last dialed number.
K AUTO ANS/MUTE: Used to receive an incoming call in
hands-free mode or mute the microphone/handset during a
conversation.
L TRANSFER: Used to transfer a call to another party.
M
AUTO DIAL/STORE
*2
: Used for System/Personal Speed
Dialing or storing programme changes.
N HOLD: Used to place a call on hold.
O INTERCOM: Used to make or receive intercom calls.
P SP-PHONE (Speakerphone): Used for performing hands-free
operations.
Q Microphone: Used for hands free conversations.
R VOLUME (KX-NT511 only): Used to adjust the volume and the
display contrast.
Navigator Key (KX-NT551/KX-NT553/KX-NT556 only): Used
to adjust the volume and the display contrast or select desired
items.
S
ENTER
*3
: Used to assign the selected item.
T
Soft Buttons (S1-S4)
*3
: S1-S4 (located from left to right) are
used to select the item displayed on the bottom line of the
display.
U
EHS (Electronics Hook Switch) Jack
*3
V
FWD/DND
*3
: Used to switch Call Forwarding or Do Not Disturb
on your extension.
9
Location of Controls