19
System Programming
System Speed Dialing Number Set
Description
Used to program System Speed Dial numbers. These numbers are available to all exten-
sion users. There are 80 numbers from 00 through 79.
Condition
• A maximum of 32 digit numbers can be stored.
• You must store an automatic line access code (0 or 9), or an individual line code (81 or 82)
first. The automatic line access code is assigned in “#52 CO Line Access Number
Selection”.
• If you store a pause, press .
Input Format
Explanation
• [AA]=Speed dial number: 00 through 79 • Phone number: 32 digits max.
Default NO REGISTRAZ
Dial Type Selection
Description
Assigns the Dial Type (tone or pulse) to CO line.
Input Format
Explanation
• [A]= 1: LU1/ 2: LU2 • [B]= 0: DECADICO/ 1: TONI
Default Both COs– 0: DECADICO
Outgoing Permitted CO1 Assignment (Day/Night)
Description
Determines the extensions which can have access to CO line 1 in both day and night
modes. The extension users can make outgoing CO calls if their extensions are assigned as
“ABILITATO”.
Input Format
Explanation
• [A]= 1 through 6 (corresponding to extension no. 21 through 26)
• [B]= 0:DISABILITATO/ 1: ABILITATO
Default All extensions– 1: ABILITATO
0
0
[AA] [Phone No.]
0
1
[A] [B]
0
2
2
(for day) / (for night) [A] [B]
7
To Next Page
Loading...
