Panasonic KX-T7130 - System Programming: Call Restriction; TRS Denied Code Configuration (Class 2, 3); TRS Denied Code Configuration (Class 3); OGM Recording for DISA Feature

22
System Programming
TRS Denied Code (CLASS 2, 3)
Description
Allows you to specify the numbers which are toll-restricted for TRS Class 2 and Class 3.
Condition
• The character “ ” can be any number.
Input Format
Explanation
• [A]= Code No.: 0 through 9 1 digit • Denied code number: 7 digits,
Default All codes– NO REGISTRAZ
TRS Denied Code (CLASS 3)
Description
Allows you to specify the numbers which are toll-restricted for TRS Class 3.
Condition
• The character “ ” can be any number.
Input Format
Explanation
• [A]= Code No.: 0 through 9 1 digit • Denied code number: 7 digits,
Default All codes– NO REGISTRAZ
OGM Recording
Description
Used to record an outgoing message for Direct Inward System Access (DISA).
Condition
• The recording time is a maximum of 16 seconds.
• If you perform programming with a PT, the message “REGISTRAZIONE” will be
displayed on its panel.
• If the DISA/FAX Detect card is not installed, you will hear a reorder tone and the program
is finished.
Message example: “This is AAA company. Please enter 1 for Mr. AA, 2 for Mr. BB.......
6 for Ms. FF. Thank you.”
Input Format
0
8
[A] [Denied code No.]
9
0
[A] [Denied code No.]
1
0
(Record your message)