27
System Programming
Note
• You cannot check the assignments of the programs #60, #62, #63, #65, #66 and #69 by setting
the MEMORY switch to “PROGRAM”, and entering “#” and the program address.
Other Programs (continued)
• DISA Ringing Time Assignment
Sets the time to forward a call sent by the DISA
feature to other extensions. If the call is not
answered by the designated extension within the
programmed time, the call is forwarded to exten-
sions which are not assigned as
“DISABILITATO” in the #04/#74 CO1 Ringing
Assignment (Day/Night) and #05/#75 CO2
Ringing Assignment (Day/Night). If
“DISABILITATO” is selected in this program,
the telephone at the designated extension rings
for 60 seconds and the call is not forwarded.
Input Format: #60 [A]
• [A]=0: DISABILITATO / 1: 10 SEC/
2: 20 SEC (default)/ 3: 35 SEC
• Toll Restriction Code Check
Assigns whether “ ” or “#” is to be checked or
not when a user dials them in the Toll Restriction
code.
Input Format: #62 [A]
• [A]=0:DISABILITATO/
1: ABILITATO (default)
• CO Indicator Assignment
Assigns whether an incoming CO call indicates
or not on the CO button. Also it allows an
extension user to answer the call by pressing the
CO button when “DISABILITATO” is selected in
the #04/#74 “CO1 Ringing Assignment” or the
#05/#75 “CO2 Ringing Assignment” program.
Input Format: #63 [A]
• [A]=0:DISABILITATO (The indicator lights
red and a user cannot
answer the call.)
1: ABILITATO (The indicator is
flashing and a user can
answer the call.)
(default)
• Hookswitch Flash Time Range
Assignment
Sets the hookswitch flash time range.
Input Format: #65 [A]
• [A]=1: 80–1000MS / 2: 80–130MS
3 : 50–130MS (default)
• Dial Start Time
Sets the time the system waits before dialing after
a CO lined is seized.
Input Format: #66 [A]
• [A]=1: 800 MS (default)/ 2: 2000 MS
To Next Page
Loading...
