Panasonic kx-t7320 - Station Programming for KX-TA624

Station Programming for KX-TA624
To enter the programming mode
To exit the programming mode
^PROGRAM^
^PROGRAM^
Operation
Direct Station
Selection
fa^orrkcs
CONF
(Conference)
CO f —r-\ „ AUTO/STORE
CEZD ► CD ► 0=)
One-touch
Dialing
a=z> ► G DI des n " ed ] ► 0=5'
Log-In/
Log-Out
Q > ► (8 j ► n—)
FWD/DND
rf—> ► (T) ► afz)
SAVE
0 > ► ( 5 ) ► n—>
Caller ID
Indication
- Common
a±z> ► CD CD ► <x=o
Caller ID
Indication
- Personal
Q > ► ( 6 ) ► n—)
Caller ID
Selection
- Common
a=3 ► CD> CD ► a==5
Caller ID
Selection
- Personal
0 ) ► ( 7 ) ► n—>
Preferred Line Assignment,
Outgoing
S~~. N /•—--\ AUTO/STORE
C 1 J C 1 j ► a ) no line
C 1 J l 2 J ► C1 ) idle line
Preferred Line Assignment,
Incoming
CD CD ► U _ ) no line
CD CD ► a=5 ringing line
Intercom Alert Assignment
f m "\ f 1 ‘N ^ AUTO/STORE
C 4 J C 1 J ► Cl- ) ring calling
Z' I \ / -7 \ . AUTO/STORE
(4 ) ( 2 ) ► n - ) voice callina
Call Waiting Tone Type Assignment
( 5 ) ( 1 ) ► n-) tone 1
rZ. \ \ b. AUTO/STORE , _
(.5 ) C 2 J ► n- ) tone 2
Station Programming Data
Default Set *
r~Zr\ f w A ^ AUTO/STORE
CDUD^ azz>
If you press PROGRAM button during on-hook, the proprietary telephone goes to
the program mode. And if you press it again during program mode, the proprietary
telephone returns to on-hook condition. (It operates like an alternate switch.)
AUTO indicator lights on during Program mode.
* Note: This only default clears assignments not using a CO button.
8