3
Tilt Angle Adjustment
The tilt angle of the operation board can be adjusted to one of four angles.
To lift: Lift up the operation board to the desired step-angle (1 2 3 4).
To set down:
Lift up the operation board to the highest angle and then press down to step-angle 1.
Be careful not to get your fingers caught between the base and the operation
board.
Wall Mounting
This unit can be mounted on a wall.
1
Set the operation board to
step-angle 1.
2
Connect the telephone line cord, and
then attach first and then of the wall
mounting adaptor.
3
Mount the unit on the wall.
1
2
3
4
To Next Page
Loading...
