Panasonic KX-TA1232 - Setting the Date and Time; Enabling the Outgoing Call Log

Before Operating the Handset
6
Setting the Date and Time
If you selected “PBX Type-Type 2 (KX-TD series)” in the PBX Type setting, you should
set a date and time.
Enabling the Outgoing Call Log
The default setting is “Off” for the Outgoing Call Log. You can enable the Outgoing Call
Log if needed.
• Set the current date and time on the base unit. If you do not do so, the date and
time of incoming calls will not be displayed correctly.
• Only the numbers you dial, or numbers dialed using Hot Key Dial or Phonebook
will be stored in the Outgoing Call Log.
Press the
Joystick.
Select
“Date&Time” .
Press the
Joystick.
Press the
Joystick.
Enter Day (01-31), Month (01-12),
Year (00-99), Hour (00-12)
and Minute (00-59) from the left.
Press the Right
Soft Key to select
“AM” or “PM”.
date & time
Press the
Joystick.
Select “ Setting
Base”.
Press the
Joystick.
Select “Other
Option” .
Select
“Outgoing Log” .
Press the
Joystick.
Press the
Joystick.
Select “On” .
Press the
Joystick.
Press the
Joystick.
Enter your password.
(default: 1234)
Enter Password
----
Select “ Setting
Handset”.