Panasonic KX-TA308 - External Feature Access

3-70 Telephone Features
E 3.2 Telephone Features
Conditions
• A “Flash Time” must be assigned as required by the host PBX, or outside (CO) line.
• You may access some features of the host PBX using the FLASH/RECALL button. If
the system is connected to a host PBX and the flash operation is required, follow the
flash operation procedure which is required by the host PBX.
Programming References
• System Programming — Installation Manual
[110] Flash Key Mode
[418] Flash Time
Feature Reference
Flash
PT
PT
External Feature Access
Allows you to access special features (e.g., Call Waiting) offered by a host PBX or
Central Office. This feature is effective only during an outside call. You can access the
feature by using either the FLASH/RECALL button or the feature number.
Using the FLASH/RECALL button
PT
Press FLASH/RECALL.
Enter the desired service code.
code
During a conversation with an outside party
FLASH/RECALL
• The current call is placed on hold.
SLT
Flash the hookswitch. Enter the desired service code.
code
During a conversation with an outside party
Dial 6.
6
• The current call is placed on hold.
Using the feature number