Panasonic KX-TA308 - Message Waiting

3-78 Telephone Features
M 3.2 Telephone Features
Message Waiting
When the called extension is busy or does not answer your call, you can leave a
notification so that the called party may call you back.
As a message receiver, the lit Message/Ringer Lamp lets you know that a call has been
received. If you receive notification, you can call back the original party by a simple
operation. This operation is available only for proprietary telephones with MESSAGE
buttons.
Setting
Any Telephone
Dial 701.
Enter the extension number
(100 through 199) where
the message will be left.
Dial #.
extension no.
Lift the handset
or press
SP-PHONE/
MONITOR.
Hang up or press
SP-PHONE/MONITOR.
Confirmation
tone and
dial tone
0 17
PT
Press MESSAGE.
Hang up or press
SP-PHONE/MONITOR.
Confirmation tone
and dial tone
If the called extension is busy or does not answer
MESSAGE
Any Telephone
Dial 702.
Enter the extension number
(100 through 199) where
you left a message.
Dial #.
extension no.
Lift the handset
or press
SP-PHONE/
MONITOR.
Hang up or press
SP-PHONE/MONITOR.
Confirmation
tone and
dial tone
207
Canceling
• Single line telephone users can dial “0” instead of “#”.
• Single line telephone users can dial “0” instead of “#”.