Panasonic KX-TA308 - Pickup Dialing (Hot Line) (- Single Line Telephone Only)

Telephone Features 3-101
3.2 Telephone Features P
Conditions
• This feature will not work if you answer an incoming call or retrieve a call on hold.
• Up to thirty-two digits, consisting of “0 through 9” and “”, can be stored. The “”
button is used as a PAUSE. However, in the account code verify-all, verify-toll and
forced modes, “” is not regarded as a pause.
• An account code must be stored by pressing “” and entering the account code after
the line access code in the account code verify-all and forced modes.
• During the waiting time after going off-hook, you can call another party and override
this feature. You can change the waiting time between going off-hook and connecting
with a called line by System Programming.
• A rotary telephone cannot use this feature.
Programming Reference
• System Programming — Installation Manual
[203] Pickup Dial Delay Time
Pickup Dialing (Hot Line) (— Single Line Telephone only)
Allows you to make an outgoing call by just going off-hook.
Storing a phone number
SLT
Confirmation
tone and
dial tone
Lift the handset
or press
SP-PHONE/
MONITOR.
Dial 742.
Enter the phone number.
phone no.
Dial #.
Hang up or press
SP-PHONE/MONITOR .
4 27
• You must dial a line access code (9 or 81 through 83) as the first
digit when storing an external party phone number.
SLT
Confirmation tone
and dial tone
Lift the handset or press
SP-PHONE/MONITOR.
Hang up or press
SP-PHONE/MONITOR.
To set: Dial 741#.
To cancel: Dial 740#.
To set.
To cancel.
147
047
Setting / Canceling
SLT
Lift the handset or press
SP-PHONE/MONITOR.
Wait for an answer.
Talk.
Dialing