Panasonic KX-TA308 - Extension Password Set (Manager Only)

3-130 Telephone Features
3.3 Operator/Manager Service Features
— To exit the Station Programming mode, press the PROGRAM button.
Conditions
• The extension number is displayed in the order of the jack number when you press the
NEXT or PREV button.
• To erase an incorrect entry, press the CLEAR (TRANSFER) button and enter a new
number.
Feature References
Walking COS
Manager Programming (Manager only) (3.3 Operator/Manager Service Features)
Extension Password Set (Manager only)
The manager can assign a password to each extension. The assigned password can be
used for the Walking COS feature. The assigned password for the manager (jack number
01) can also be used for the Manager Programming.
Setting
— Be sure that you are in the Station Programming mode. Press the PROGRAM button.
PT
Dial 7. Enter the system
password (4 digits).
system password
Press
AUTO DIAL/STORE.
Press
SP-PHONE
(NEXT).
Enter the
password
(4 digits).
password
Press
AUTO DIAL/STORE.
Press SP-PHONE (NEXT)
or REDIAL (PREV) and
select the extension you
want to assign.
Repeat these steps.
7
AUTO DIAL
STORE
AUTO DIAL
STORE
SP-PHONE
SP-PHONE
REDIAL
<PT Display Example>
Password : ....
<PT Display Example>
Ext101:1111