3-50 Features
P-R
3 Features
Pulse to Tone Conversion
Allows an extension user to change the dialing mode from Pulse to Tone after entering a
telephone number to access services, such as computer telephone services or Voice Mail,
which require tones.
• This feature only works for outside (CO) lines which have set “Pulse Mode” or ”Call
Blocking Mode” in program [401].
• Changing from Tone to Pulse is not possible.
• Required System Programming
[401] Dial Mode
• Operating Instructions Reference
1.7 Useful Features, “Pulse to Tone Conversion”
☞
!
!
Receiving Calls
Allows an extension user to receive an intercom or outside call by going off-hook. A
proprietary telephone user can also receive a call by pressing the rapid flashing CO or
INTERCOM button, and talk (handsfree mode) if the telephone has the SP-PHONE button.
• A proprietary telephone user can select the Line Preference for incoming outside calls.
See “Preferred Line Assignment — Incoming” in this section.
• Required System Programming
[408]–[410] “Flexible Ringing Assignment — Day/Night/Lunch”
[411]–[413] “Delayed Ringing Assignment — Day/Night/Lunch”
• Related Feature Reference
Preferred Line Assignment — Incoming
• Operating Instructions Reference
1.4 Receiving Calls, “Receiving Calls”
☞
!
!
Redial
<Automatic Redial>
Allows a proprietary telephone user to redial the last number dialed, and saved number by
the Saved Number Redial feature automatically. This is done by pressing the SP-PHONE or
MONITOR button and the corresponding button. Redial will be repeated automatically the
assigned number of times in program [113] until the called party answers. The interval time
between Automatic Redial is programmed in [114]. If another operation is performed during
Automatic Redial, this function will be canceled. This feature is not available for the
KX-T7055.
<Last Number Redial>
Every extension automatically saves the last telephone number dialed so that the extension
user can make a call to the same party later using a simple operation.
To Next Page
Loading...
