Panasonic KX-TA616 - UCD Group

System Programming 4-67
4.2 System Programming [520]-[522]
Assigns the length of time the system holds an incoming outside call via the UCD feature
when all extensions in the UCD group are busy. When the programmed time expires, the
call will be intercepted or disconnected according to program [523] “UCD Busy Mode”.
* Waiting time: 1 through 32 (minutes) / 1 through 59 (seconds)
Default 10 minutes
• Feature Reference
Section 3, Features
Uniform Call Distribution (UCD)
[521] UCD Busy Waiting Time*
1
Assigns one extension group which works as the UCD group.
Default Extension group number 1
• Feature Reference
Section 3, Features
Uniform Call Distribution (UCD)
(1···8)
[520] UCD Group*
1
2
5
NEXT
0
STORE
END
extension group no.
☞
☞
Assigns interval time between sending UCD outgoing messages to an incoming outside call
via the UCD feature when all extensions in the UCD group are busy. The UCD outgoing
message is repeated during the time programmed in [521] “UCD Busy Waiting Time”.
Default 1 minute
• Feature Reference
Section 3, Features
Uniform Call Distribution (UCD)
[522] UCD OGM Message Interval Time*
1
2
5
NEXT
2
STORE
END
SELECT
(30 sec/1/
1.5/2 min)
☞
*
1
: Required only when the optional OGM/FAX Detection
Card is installed.
2
5
NEXT
1
STORE
END
(min/sec)
waiting time*
SELECT