Installation 2-5
2.4 Wall Mounting
This set is designed for wall mounting only. The wall where the main unit is to be mounted
must be able to support the weight of the main unit. If screws other than the ones supplied
are used, use screws with the same diameter as the ones enclosed.
Mounting on a Wooden Wall
1. Place the template (on the last page) on the wall
to mark the screw positions.
2. Install the screws (included) into the wall.
Drive the screw
to this position
Wooden
Wall
Mounting on a Concrete or Mortar
Wall
1. Place the template (on the last page) on the wall
to mark the screw positions.
2. Drill holes and drive the anchor plugs (user-
supplied) with a hammer, flush to the wall.
Concrete Wall
To the wall surface
Anchor Plug
29 mm
{1 1/8 inch}
6.4 mm
{
1/4 inch
}
3. Install the screws (included) into the anchor
plugs.
Drive the screw
to this position
3. Hook the main unit on the screw heads. 4. Hook the main unit on the screw heads.
To Next Page
Loading...
