Features 3-13
3 Features
C
15 s
Call Waiting
During a conversation, a Call Waiting tone informs an extension user that there is a call
waiting. The user can answer the second call by disconnecting the first call or placing it on
hold. When Call Waiting is enabled, a Call Waiting tone is sent to the user under the
following conditions.
1) When an outside call (except a doorphone
call) is received, or
2) When another extension executes the Busy
Station Signaling (BSS) feature.
• For proprietary telephone users, a Call Waiting
tone (Tone 1 or Tone 2) can be selected in the Proprietary Telephone Settings. Tone 2
depends on System Programming. Program [423] is for outside calls and program [115]
is for intercom calls.
Tone 1
Tone 2
Single:
Double:
Triple:
• Required System Programming
[115] Extension Ringing Pattern Selection
[423] Outside (CO) Line Ringing Pattern Selection
• Related Feature Reference
Hold
• Operating Instructions References
1.2 Proprietary Telephone Settings,
“Customizing Your Telephone Functions”, Call Waiting Tone Selection
1.5 During Conversation, “Call Waiting”
☞
!
!
5 s
• Required System Programming
[111] Hold Music Selection
[205] Outside-to-Outside (CO-to-CO) Line Duration Time Limit
[606] Call Transfer to an Outside (CO) Line
• Related Feature Reference
Hold, Music on Hold
• Operating Instructions Reference
1.5 During Conversation, “Transferring a Call to an Outside (CO) Line (Call Transfer –
to Outside (CO) Line)”
☞
To Next Page
Loading...
