Installation 2-13
2.10 External Music Connection
One music source, such as a radio (user-supplied), can be connected to the system as
illustrated below.
Insert the plug to the earphone/headphone port on the external music source.
Use an EIAJ RC-6701 A plug (2-conductor, ø 3.5 mm in diameter).
• Input impedance: 8 Ω
Maximum length of the cable
ø 0.8 mm – ø 1.3 mm: Under 10 m
POWER
EXT.
MUSIC
External Music source
External Music Port
• System programming for the music sources used for Music on Hold and Background
Music (BGM) is required.
• To adjust the sound level of the Music on Hold, use the volume control on the external
music source.
• External Music port is at SELV.
• Required System Programming
Section 4.2, System Programming
[111] Hold Music Selection
• Feature Reference
Section 3, Features
Music on Hold / Background Music (BGM)
☞
!
!
PSQX1708ZA-03E.QX 99.10.15 5:46 PM Page 13
To Next Page
Loading...
