Panasonic KX-TA624 - Call Waiting Tone Selection; Intercom Alert Assignment

Operations 1-7
1.2 Proprietary Telephone Settings
Basic Operations
OPERATION
• 1.5 During a Conversation, “Call Waiting”
• 2.1 Tone / Ring Tone List
Proprietary Telephone Setting – Data Default Set
Allows you to reset the proprietary telephone’s settings to the default settings.
• Preferred Line Assignment — Outgoing (default: No Line Preference)
• Preferred Line Assignment — Incoming (default: Ringing Line)
• Exchange Line Ringing Selection (default: Ring – all exchange lines)
• Intercom Alert Assignment (default: Tone Call)
• Call Waiting Tone Selection (default: Tone 1)
Call Waiting Tone Selection
You can select the type of call waiting tone, either Tone 1 (default) or Tone 2.
SELECTION PROGRAMMING INPUT
❑ Tone 1
❑
Tone 2
AUTO DIAL
STORE
#
5 1
AUTO DIAL
STORE
5 2
AUTO DIAL
STORE
☞
Intercom Alert Assignment
The type of intercom alerting signal (tone/voice) can be selected by programming.
Voice Call: Call arrival is indicated by the caller announcing themselves through the
speaker on the receiving extension.
Tone Call (default): Normal ringing is heard at the receiving extension.
SELECTION PROGRAMMING INPUT
4 2
AUTO DIAL
STORE
4 1
AUTO DIAL
STORE
❑ Tone Call
(Cancels the Voice Call.)
❑ Voice Call
• This feature also cancels the Handsfree Answerback feature. The operation of the
AUTO ANSWER/MUTE button in the Room Monitor feature is also affected.
!
!
PSQX1709ZA-02.QX 99.10.15 9:55 AM Page 7