Operations 1-17
1.3 Making Calls
Basic Operations
Outside Calling
Allows you to make a call to an external party using one of the following line access methods.
1.) Making Outside Calls Using Automatic Line Access
2.) Making Outside Calls Using Individual Line Access
3.) Making Outside Calls Using Trunk Group Access
• An exchange line which is not assigned to a line key cannot be dialled.
• Helpful hints for the Handsfree (speakerphone) operation are noted in the “Handsfree
Operation” feature.
• 1.2 Proprietary Telephone Settings, “Customising the Buttons on Your Telephone”,
Single Exchange Line (S-CO) Key,
Trunk Group (G-CO) Key
• 1.6 Before Leaving Your Desk, “Locking Your Telephone (Electronic Extension Lockout)”
• 1.7 Useful Features, “Calling with Account Codes (Account Code Entry)”
• 1.7 Useful Features, “Calling Using Your Privileges from Another Extension (Walking COS)”
• 1.8 Operator / Manager Service Features, “Remote Extension Lock”
• See the Installation Manual, Section 3, “Outside Calling”.
• See the Installation Manual, Section 3, “Call Barring Override by Account Codes”.
• See the Installation Manual, Section 3, “Call Barring — Extension Lock Boundary Class”.
• See the Installation Manual, Section 3, “Call Barring”.
PT
PT
Calling the Operator (Operator Call)
• If an operator is not assigned, this feature is not available and you will hear reorder tone.
• If the line access number is assigned to “0” by System Programming, the operator call
number will be changed to “9”.
• See the Installation Manual, Section 3, “Operator Call”.
Allows you to call the operator within the system. One extension can be assigned as the
operator.
Any Telephone
Dial 0 or 9.
Lift the handset or press
SP-PHONE/MONITOR.
0 9
or
!
!
!
!
☞
☞
PSQX1709ZA-03.QX 99.10.15 9:56 AM Page 17
To Next Page
Loading...
