Panasonic KX-TA624 - Locking Your Telephone (Electronic Extension Lockout)

1.6 Before Leaving Your Desk
Operations 1-57
Basic Operations
Locking Your Telephone (Electronic Extension Lockout)
• If another user tries to access an exchange line and attempts to dial from a locked extension,
the user will hear a reorder tone and for PT users “Restricted” is shown on the display.
However, calls can be made at a locked extension depending on system programming.
System programming determines which COS number applies to calls at the locked
extension.
• An extension assigned as an operator or manager can cancel this function for all extensions
(Electronic Extension Lockout — CANCEL ALL).
• “Remote Extension Lock Control” overrides this feature. If the operator or manager sets
Remote Extension Lock on the extension you have already locked, you cannot unlock it.
• The lock code must be 4 numerical digits. The “#” and “ ” digits may not be used.
• You can make intercom calls and receive intercom or outside calls at a locked extension.
• You can make outside calls depending on the level of call barring.
• 1.8 Operator/Manager Service Features, “Electronic Extension Lockout — CANCEL ALL”
• 1.8 Operator/Manager Service Features, “Remote Extension Lock”
• See the Installation Manual, Section 3, “Call Barring — Extension Lock Boundary Class”.
• See the Installation Manual, Section 3, “Extension Lock”.
Any Telephone
Lift the handset or press
SP-PHONE/MONITOR.
Dial 77. Hang up or press
SP-PHONE/MONITOR.
Enter a 4-digit lock code
(0000 through 9999) twice.
Dial #.
7 7
lock code lock code
same code
Confirmation tone
and dial tone
#
Any Telephone
Lift the handset or press
SP-PHONE/MONITOR.
Dial 77. Hang up or press
SP-PHONE/MONITOR.
Enter the same lock code
you used to lock the
extension.
Dial #.
7 7
lock code
Confirmation tone
and dial tone
#
Allows you to lock your extension so that other users cannot
make outside calls from your extension.
Locking
Unlocking
!
!
☞
• Single line telephone users can dial “0” instead of “#”.
• Single line telephone users can dial “0” instead of “#”.
PSQX1709ZA-05.QX 99.10.15 9:58 AM Page 57