1.7 Useful Features
Operations 1-59
Advanced Operations
Conference (3-party)
During a 2-party conversation, you can add a third party to make a 3-party conference. The
maximum number of extensions and exchange lines in a conference can be changed by
System Programming.
Establishing a conference
SLT
Enter the phone number
of the third party.
Talk to the
third party.
During a 2-party conversation
Press
Recall.
Dial 3.
Press
Recall.
3
A 3-party conference
is now established.
phone no.
Confirmation
tone (optional)
R R
• You must dial the line access code (9, 0 or 81 through 86) as the first digit
when calling an external party.
• The other party is placed on hold.
PT
Enter the phone
number of the
third party.
Talk to the
third party.
During a 2-party conversation
A 3-party conference
is now established.
phone no.
Confirmation
tone (optional)
Press CONF.
CONF
Press CONF.
CONF
• You must dial the line access code (9, 0 or 81 through 86) as the first
digit when calling an external party.
• The CONF indicator light turns steady red.
• The corresponding line ley or INTERCOM indicator light turns green.
• The current party is placed on hold.
• The CONF indicator light flashes red slowly.
PSQX1709ZA-05.QX 99.10.15 9:58 AM Page 59
To Next Page
Loading...
