1.7 Useful Features
1-88 Operations
• 2.1 Tone / Ring Tone List
• See the Installation Manual, Section 3, “Ringing Pattern Selection”.
A different ringing pattern is used to distinguish intercom calls from incoming outside calls.
• You can select the ringing pattern as follows in System Programming.
— Exchange line: 3 patterns (A, B or C)
— Extension: 3 patterns (A, B or C)
— Doorphone: 4 patterns (A, B, C or D)
Ringing Pattern Selection
☞
Distinctive Dial Tones
A distinctive dial tone will be heard from the handset if the extension user has previously
activated a certain feature.
Dial Tone 1: Ordinary dial tone
Dial Tone 2: When any of the following features are activated.
• Absent Message Capability
• Back Ground Music (BGM) (only a proprietary telephone)
• Call Forwarding
• Call Pickup Deny
• Data Line Security
• Do Not Disturb (DND)
• Electronic Extension Lockout
• Message Waiting (only a proprietary telephone)
• Pickup Dialling (only a single line telephone)
• Remote Extension Lock Control
• Timed Reminder
Dial Tone 3: When performing Account Code Entry and answering a Timed Reminder call.
Also sent when going off-hook with an SLT which has a message in a Voice
Processing System.
• 2.1 Tone / Ring Tone List
• See the Installation Manual, Section 3, “Distinctive Dial Tones”.
☞
PSQX1709ZA-06.QX 99.10.15 9:59 AM Page 88
To Next Page
Loading...
