Installation 2-33
2.22 System Restart
After starting the system, if the system does not operate properly, restart the system.
Before restarting the system, try the system feature again to confirm whether there definitely
is a problem or not.
System Restart causes the following.
• Camp-on is cleared.
• Calls on Hold are terminated.
• Calls on Exclusive Hold are terminated.
• Calls in progress are terminated.
• Call Park is cleared.
• Message Waiting is cleared.
• Last Number Redial is cleared.
• Saved Number Redial is cleared.
Other data is not cleared by System Restart.
1. Turn the Power Switch “OFF” and then “ON”.
• If the system still does not operate properly, please see 2.23, “System Data Clear”.
!
!
PSQX1708ZA-03E.QX 99.10.15 5:47 PM Page 33
To Next Page
Loading...
