Telephone Features 3-121
3.2 Telephone Features T
Toll Restriction for System Speed Dialing
Allows you to change the toll restriction in “System Speed Dialing”. Normally, calls
originated by “System Speed Dialing” are restricted depending on the extension’s toll
restriction COS number. Once this option is set, the COS number is changed to the one
assigned in the program [301]. You can select the toll restriction COS number by System
Programming.
Programming Reference
• System Programming — Installation Manual
[301] Toll Restriction — System Speed Dialing Boundary Class
Feature References
System Speed Dialing
Toll Restriction (→ See the Installation Manual.)
Toll Restriction — Station Lock Boundary Class
Allows assigning a toll restriction class when the Electronic Station Lockout or Remote
Station Lock feature is set.
You usually cannot make an outside call at a locked extension, however if a toll
restriction class is assigned in program [312], you can make an outside call at the locked
extension.
Conditions
• The higher toll restriction COS number will take precedence.
For example, if toll restriction COS number 4 is assigned to an extension and the
station lock boundary class is 3, you are allowed to make a call with toll restriction
COS 4.
Programming Reference
• System Programming — Installation Manual
[312] Toll Restriction — Station Lock Boundary Class
Feature References
Electronic Station Lockout
Remote Station Lock Control
Toll Restriction (→ See the Installation Manual.)
To Next Page
Loading...
