Panasonic KX-TA624 - Idle Line Preference - Outgoing; Prime Line Preference - Outgoing

Station Programming (Personal Programming) 2-29
2.2 Station Programming (Personal Programming)
Idle Line Preference — Outgoing (Assignment)
When going off-hook, you are connected to an idle line.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
Prime Line Preference — Outgoing (Assignment)
When going off-hook, you are connected to a pre-assigned line.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
PT
Dial 2.
2
Press STORE.
AUTO DIAL
STORE
Dial 1.
1
• The STORE indicator lights.
• The display shows the initial
programming mode.
• The display shows the current
status.
<PT Display Example>
Pref. Out:Idle
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
PT
Dial 3.
3
Dial 1.
1
Press STORE.
AUTO DIAL
STORE
Enter the outside (CO) line number
(1 through 6).
outside line (CO) no.
• The STORE indicator lights.
• The display shows the initial
programming mode.
• The display shows the current status.
<PT Display Example>
outside (CO) line number
Pref. Out :CO-x