6.1 Connect
100 Programming Manual
To connect to the PBX by Modem
1. From the Connect menu, select Connect.
The Connect to PBX window will be displayed.
2. Select a connection option.
• Select the Use profile check box if you want to use a pre-saved profile.
a. Select the profile to use from the drop-down list.
The Setup button will become unavailable.
b. If the system password for the PBX has not been stored with the profile, enter it.
If the system password has been stored with the selected profile, it does not need to be
entered.
• Select the Modem radio button if you want to enter parameters manually.
a. Enter the system password for the PBX.
b. Click Setup.
c. Modify the connection parameters as required. For more details, see the table below.
d. Click OK.
3. Click OK.
To Next Page
Loading...
