Panasonic KX-TA824 - 2.1 Operator;Manager Service Features

9.1 System [1]
136 Programming Manual
Programming Manual References
[801] SMDR Parameter
Feature Manual References
1.1.112 Station Message Detail Recording (SMDR)
Selection for Printing—Outgoing Call
Selects whether the dialed digits of outgoing outside (CO) line calls are printed.
Default
On
Value Range
On (Print all calls), Off (No printing), Toll (Print toll calls only)
Programming Manual References
[802] Incoming/Outgoing Call Selection for Printing
Feature Manual References
1.1.112 Station Message Detail Recording (SMDR)
Selection for Printing—Incoming Call
Selects whether the dialed digits of incoming outside (CO) line calls are printed.
Default
On
Value Range
On (Print all calls), Off (No printing)
Programming Manual References
[802] Incoming/Outgoing Call Selection for Printing
Feature Manual References
1.1.112 Station Message Detail Recording (SMDR)
Selection for Printing—Account Code
Selects whether to print out the account code stored in Account Code on the 9.1.6 Account Codes [1-5]
screen, or just the index of the account code on SMDR. The index of the account code is shown when
Verify-All or Verify-Toll is selected in
Account Code Mode on the 9.2.1 Main [2-1] screen.
Default
CODE