9.1 System [1]
Programming Manual 139
9.1.10 Automatic Pause Insertion Codes [1-9]
A maximum of 40 Automatic Pause Insertion codes can be programmed. When a dialed telephone number
matches one of the Automatic Pause Insertion codes specified here, a pause will be automatically inserted
after the code. This is particularly convenient if a second dial tone is sent from your telephone company.
Automatic Pause Insertion Code
Specifies the Automatic Pause Insertion codes that are checked with the outgoing outside (CO) line call
number.
Default
All codes: — (Not stored)
Value Range
Max. 11 digits (consisting of 0–9)
Programming Manual References
[311] Automatic Pause Insertion Code
Feature Manual References
1.1.98 Pause Insertion
To Next Page
Loading...
