9.1 System [1]
140 Programming Manual
9.1.11 Detail [1-10]
Detailed information about the PBX can be programmed.
Extension—Ring Tone Pattern
Selects the extension ring tone pattern for incoming intercom calls.
Default
Double
Value Range
Single, Double, Triple
Programming Manual References
[115] Extension Ring Tone Pattern
Feature Manual References
1.1.69 Intercom Call
1.1.108 Ring Tone Pattern Selection
2.2.1 Tones/Ring Tones
Extension—Ringback Tone Pattern
Selects the ringback tone pattern for outgoing intercom calls and for incoming outside (CO) line calls
(including a Direct Inward System Access [DISA] call).
Default
Single (5 s)
To Next Page
Loading...
