9.3 CO [3]
182 Programming Manual
Value Range
01–24
Extension
Indicates the extension number and name (reference only).
Value Range
Extension no. and name specified in Ext. no. and Name on the 9.1.3 Numbering Plan [1-3] screen
Programming Manual References
9.1.3 Numbering Plan [1-3]—Ext. no., Name
Ringing for incoming CO calls—Day, Night, Lunch
Selects whether the extension will ring or not for incoming outside (CO) line calls in each time service mode.
If the extension is set to ring, the ring delay can be specified.
Default
All outside (CO) lines—all jacks: On (Immediate)
Value Range
Ring, Start Time
Ring: On (checked), Off (unchecked)
Start Time: Immediate, 5 s, 10 s, 15 s
Programming Manual References
[408-410] Flexible Ringing—Day/Night/Lunch
[411-413] Delayed Ringing—Day/Night/Lunch
Feature Manual References
1.1.42 Direct Inward System Access (DISA) Ring
1.1.75 Line Preference—Incoming
1.1.90 Outside (CO) Line Ringing Selection
1.1.109 Ringing, Delayed
Outgoing Call—Day, Night, Lunch
Specifies which extensions can make outside (CO) line calls in each time service mode. It is impossible to
disable (Off) all extensions for all outside (CO) lines in each time service mode. In each mode, at least one
extension must be allowed to make an outside (CO) line call.
Default
All outside (CO) lines—all jacks: On
Value Range
On (checked), Off (unchecked)
To Next Page
Loading...
