9.5 TRS
194 Programming Manual
No.
Indicates the denied code number (reference only).
Value Range
01–20
Class 2–5
Specifies the toll-restricted numbers for classes 2–5.
Default
All codes: — (Not stored)
Value Range
Max. 11 digits (consisting of 0-9, , #, and x [wild card])
Programming Manual References
[302-305] TRS—COS 2-5 Denied Code
9.5.3 Exception Codes [5-3]
Feature Manual References
1.1.117 Toll Restriction (TRS)
9.5.3 Exception Codes [5-3]
Toll Restriction (TRS) can prohibit certain extension users from making unauthorized outside (CO) line calls.
Every extension is assigned to one of 5 classes of Service (COSs) for each time service mode. COS 1 does
not restrict calls (all outside (CO) line calls are allowed). COSs 2–5 are used to restrict calls according to
the combination of Denied Code tables in
9.5.2 Denied Codes [5-2] and Exception Code tables here.
A call denied by the applicable Denied Code Tables is checked against the applicable Exception Code
Tables, and if a match is found, the call is made. A maximum of 80 exception codes can be programmed.
The available number of codes depends on the COS assigned to each extension.
To Next Page
Loading...
