9.6 DISA [6]
Programming Manual 207
Value Range
Disable, 2–4 times
Programming Manual References
[513] Cyclic Tone Detection
Feature Manual References
1.1.41 Direct Inward System Access (DISA)
FAX & Tone—DISA Ringback Tone
Selects whether to send a ringback tone or Music on Hold to the caller when a DISA call is received.
Default
Ringback Tone
Value Range
Ringback Tone, Music on Hold
Programming Manual References
[531] DISA Ringback Tone
Feature Manual References
1.1.41 Direct Inward System Access (DISA)
9.6.4 Incoming Permission [6-3]
The settings to receive Direct Inward System Access (DISA) calls can be programmed for each extension.
Jack 01–24
Enables receiving calls from DISA for each extension. The extension number and name specified in Ext.
no. and Name on the 9.1.3 Numbering Plan [1-3] screen are shown with the jack number.
Default
All jacks: On
To Next Page
Loading...
