Panasonic KX-TA824 - Call Pickup Tone; Pulse Restriction; Redialing after Pulse to Tone Conversion; Ringback Tone Pattern

2.2 PT Programming—Procedures
28 Programming Manual
[117] Call Pickup Tone
Enables the PBX to send a confirmation tone when the Call Pickup feature is activated.
Feature Manual References
1.1.20 Call Pickup, Directed
1.1.21 Call Pickup, Group
[118] Pulse Restriction
Enables the PBX to send pulse dialing to the telephone company during a conversation with an outside
party when "Pulse" or "Call Block" mode is enabled in
[401] Dial Mode.
Programming Manual References
[401] Dial Mode
[119] Redialing after Pulse to Tone Conversion
Enables the PBX to send DTMF dialing to the telephone company when an extension user redials after
changing from pulse mode to DTMF mode by pressing "
#".
Feature Manual References
1.1.104 Pulse to Tone Conversion
[125] TRS Check for * and #
Enables TRS to check for the user-dialed digits " " and "#". This is useful in preventing some unauthorized
calls.
Feature Manual References
1.1.117 Toll Restriction (TRS)
[128] Ringback Tone Pattern
Selects the ringback tone pattern for outgoing intercom calls and for incoming outside (CO) line calls
(including a DISA call).
1 1 7
NEXT SELECT STORE END
( Enable/Disable)
1 1 8
NEXT SELECT STORE END
( Enable/Disable)
1 1 9
NEXT SELECT STORE END
(Enable/ Disable)
1 2 5
NEXT SELECT STORE END
( Enable/Disable)
1 2 8
NEXT SELECT STORE END
(Single 3 s/ Single 5 s/
Double 3 s/Double 5 s)