Panasonic KX-TA824 - Call Forwarding Start Time; Hot Line Waiting Time; Call Duration Counter Start; CO-To-CO Line Call Duration

2.2 PT Programming—Procedures
32 Programming Manual
[202] Call Forwarding Start Time
Selects the length of time before a call is forwarded when the call is not answered.
Feature Manual References
1.1.12 Call Forwarding (FWD)—Busy/No Answer
[203] Hot Line Waiting Time
Selects the length of time until automatic dialing starts after an SLT user goes off-hook.
Feature Manual References
1.1.66 Hot Line
[204] Call Duration Counter Start
Selects when the call timer starts, either immediately after an outside (CO) line is seized, or after the end
of dialing. This corresponds to the length of the conversation displayed on the LCD and logged by SMDR.
Feature Manual References
1.1.43 Display Information
1.1.112 Station Message Detail Recording (SMDR)
[205] CO-to-CO Line Call Duration
Selects the maximum length of time allowed for a conversation between 2 outside parties using the FWD to
Outside (CO) Line, Call Transfer to Outside (CO) Line, Unattended Conference, or DISA feature.
Feature Manual References
1.1.91 Outside-to-Outside (CO-to-CO) Line Call Duration
2 0 2
NEXT SELECT STORE END
(5/10/ 15/
20 s delay)
2 0 3
NEXT SELECT STORE END
(0
…
4 s)
3 s
2 0 4
NEXT SELECT STORE END
(5/ 10/15/20/25/30/35/
40/45/50 s after dialing/
Instantly)
2 0 5
NEXT STORE END
(1
…
32 min)
time
10 min