Panasonic KX-TA824 - CPC Signal Detection-Outgoing; Disconnect Time

2.2 PT Programming—Procedures
Programming Manual 45
[421] CPC Signal Detection—Outgoing
Enables the PBX to detect a CPC signal from outgoing outside (CO) line calls. If disabled, CPC signal
detection is only activated during an incoming outside (CO) line call.
Programming Manual References
[420] CPC Signal Detection—Incoming
Feature Manual References
1.1.31 Calling Party Control (CPC) Signal Detection
[422] Disconnect Time
Selects the length of the disconnect signal sent from the PBX to the telephone company or host PBX.
Conditions
• The time you select must be longer than the requirements of your telephone company or host PBX.
Feature Manual References
1.1.60 Flash/Recall
4 2 1
NEXT
CO line no.
STORE END
(1
…
8/ )
SELECT
SELECT
NEXT PREV
or
To continue
To continue
(Enable/
Disable)
4 2 2
NEXT
CO line no.
STORE END
(1
…
8/ )
SELECT
SELECT
NEXT PREV
or
(0.5/ 1.5/4.0 s)
To continue
To continue