Panasonic KX-TA824 - FAX Connection; DISA Delayed Answer Time; DISA Wait Time after OGM

2.2 PT Programming—Procedures
Programming Manual 49
Conditions
• This program is available only when "With AA" is selected in [500] DISA Incoming Call Dial Mode.
• If you would like to use the Automatic Line Access number and/or Operator Call number in AA
mode, do not assign AA number(s) that correspond to Automatic Line Access or Operator Call
numbers (9 and/or 0).
Programming Manual References
[500] DISA Incoming Call Dial Mode
Feature Manual References
1.1.41 Direct Inward System Access (DISA)
[503] FAX Connection
Selects the extension number of the extension to receive fax data when the PBX receives a fax (CNG) tone
via the DISA feature.
Conditions
• To delete (disable) an extension jack number, press CLEAR in the extension jack number step.
• The assigned extension will automatically have the Data Line Security feature set.
Feature Manual References
1.1.41 Direct Inward System Access (DISA)
[504] DISA Delayed Answer Time
Selects the length of time the caller hears a ringback tone before hearing a DISA OGM or a short beep.
Programming Manual References
[900] Caller ID
Feature Manual References
1.1.41 Direct Inward System Access (DISA)
[505] DISA Wait Time after OGM
Selects the length of time the PBX keeps detecting DTMF signals or a fax (CNG) tone after completing a
DISA OGM.
Programming Manual References
[408-410] Flexible Ringing—Day/Night/Lunch
[438-440] DISA IRNA to BV—Day/Night/Lunch
5 0 3
NEXT
extension jack no.
STORE END
(01
…
24/ Disable)
5 0 4
NEXT SELECT STORE END
(0/ 3/6/12 s)
5 0 5
NEXT SELECT STORE END
(0/ 5/10/15 s)