Panasonic KX-TA824 - Doorphone Ring Tone Pattern; Doorphone Access Tone

2.2 PT Programming—Procedures
66 Programming Manual
[706] Doorphone Ring Tone Pattern
Selects the ring tone pattern for incoming doorphone calls.
Conditions
• It is recommended that you set a different ring tone pattern from the ring tone patterns specified in
[115] Extension Ring Tone Pattern and [423] CO Line Ring Tone Pattern.
Programming Manual References
[115] Extension Ring Tone Pattern
[423] CO Line Ring Tone Pattern
Feature Manual References
1.1.48 Doorphone Call
1.1.108 Ring Tone Pattern Selection
[707] Doorphone Access Tone
Selects whether the PBX sends a doorphone access tone to a monitored doorphone before monitoring
starts.
Feature Manual References
1.1.48 Doorphone Call
1.1.110 Room Monitor
7 0 6
NEXT
doorphone no.
STORE END
(1
…
4/ )
SELECT
(Single/Double/
Triple/S-Double)
NEXT PREV
or
To continue
SELECT
To continue
7 0 7
NEXT
doorphone no.
STORE END
(1
…
4/ )
SELECT
NEXT PREV
or
To continue
SELECT
To continue
( Enable/
Disable)