Panasonic KX-TA824 - Line Access, Outside (CO) Line Group

1.1 General Features
Feature Manual 101
• It is possible to specify which outside (CO) lines are connected to the PBX ( [400] CO Line
Connection). This prevents extension users from trying to select or making calls using outside (CO)
lines that are not connected.
Programming Manual References
[PT Programming]
[206] Dialing Start Time
[400] CO Line Connection
[405-407] Flexible Outward Dialing—Day/Night/Lunch
[419] Automatic Designated Line Access
[PC Programming]
9.1.7 Timers [1-6]—CO Dialing—Dialing Start Time
9.3.2 Incoming / Outgoing [3-2]—Outgoing Call—Day, Night, Lunch
9.3.3 Detail [3-3]—Connection, Automatic Line Access
Feature Manual References
1.1.61 Flexible Buttons
1.1.76 Line Preference—Outgoing
Operating Manual References
1.3.53 Line Access, Automatic
3.1.3 Flexible Button Assignment—S-CO, G-CO, or O-CO button
1.1.73 Line Access, Outside (CO) Line Group
Description
An extension user can select an idle outside (CO) line from the corresponding outside (CO) line group (
[404] CO Line Group Number) by dialing the Outside (CO) Line Group Access number and an outside (CO)
line group number, or by pressing a Group-CO (G-CO) button on a proprietary telephone (PT).
Conditions
• Line Access, Direct Outside (CO) Line
If a PT user is on-hook when pressing an idle CO button, the PT automatically enables hands-free
operation mode. The user can dial without lifting the handset or pressing the SP-PHONE or MONITOR
button.
• If Idle Line Preference ( 1.1.76 Line Preference—Outgoing) is set on the extension through personal
programming, the user can access an idle line simply by going off-hook.
• The PBX waits for a preprogrammed length of time ( [206] Dialing Start Time) after seizing an outside
(CO) line before dialing.
• Button Assignment
A flexible CO button can be customized as a G-CO. The same outside (CO) line group can be assigned
to more than one G-CO button on the same PT.