1.1 General Features
104 Feature Manual
• A flexible CO button should be assigned as an Outside (CO) Line Access button (Single-CO [S-CO],
Group-CO [G-CO] or Other-CO [O-CO]) before selecting a line preference.
• Setting a new line preference clears the previous line preference.
• In "Prime Line" mode, if a PT user receives an incoming call on a line other than the "Prime Line", the
user must go off-hook and then press the corresponding flashing CO button to answer the call.
Programming Manual References
[PT Programming]
[408-410] Flexible Ringing—Day/Night/Lunch
[411-413] Delayed Ringing—Day/Night/Lunch
[PC Programming]
9.2.3 PT personal settings [2-3]—Line Preference—Incoming
9.3.2 Incoming / Outgoing [3-2]—Ringing for incoming CO calls—Day, Night, Lunch
Feature Manual References
1.1.61 Flexible Buttons
Operating Manual References
1.2.2 Receiving Calls
3.1.2 Personal Feature Assignment—Line Preference—Incoming
3.1.3 Flexible Button Assignment—S-CO, G-CO, or O-CO button
1.1.76 Line Preference—Outgoing
Description
Through personal programming, a proprietary telephone (PT) user can select the preferred method of
seizing a line (Line Preference—Outgoing) to be used each time the user goes off-hook.
Conditions
• A flexible CO button should be assigned as an Outside (CO) Line Access button (Single-CO [S-CO],
Group-CO [G-CO], or Other-CO [O-CO]) before selecting a line preference.
• Setting a new line preference clears the previous line preference.
Method Description
Idle Line When a user goes off-hook, an idle outside (CO) line is selected
automatically from among the assigned outside (CO) lines ( [419]
Automatic Designated Line Access).
No Line When a user goes off-hook, no line is selected. In order to make a call,
the user must select the desired line manually.
Prime Line When a user goes off-hook, the preset line is selected automatically.
To Next Page
Loading...
