1.1 General Features
136 Feature Manual
[411-413] Delayed Ringing—Day/Night/Lunch
[PC Programming]
9.3.2 Incoming / Outgoing [3-2]—Ringing for incoming CO calls—Day, Night, Lunch
Feature Manual References
1.1.42 Direct Inward System Access (DISA) Ring
1.1.110 Room Monitor
Description
An extension user can monitor a room or a door through another proprietary telephone (PT) or a doorphone
without the destination party knowing.
Conditions
• To monitor using this feature, an extension must have a PT with an AUTO ANS/MUTE button or a single
line telephone (SLT) with a MUTE button. To be monitored using this feature, an extension must have
a PT with an AUTO ANS/MUTE button.
• System programming determines the extensions that can be monitored using this feature ( [612]
Room Monitor).
• A doorphone access tone will be sent to a monitored doorphone before monitoring starts ( 1.1.48
Doorphone Call). If an extension user wants to monitor a doorphone without informing the other party,
it is possible to eliminate the tone through system programming ( [707] Doorphone Access Tone).
• Access tones will not be sent to a monitored PT. Paging tones will also not be received by a monitored
PT.
Programming Manual References
[PT Programming]
[612] Room Monitor
[707] Doorphone Access Tone
[PC Programming]
9.2.1 Main [2-1]—Room Monitor
9.2.2 Feature settings [2-2]—Monitored PT set
9.7.2 Others [7-2]—Doorphone Access Tone—Door 1–4
Feature Manual References
1.1.48 Doorphone Call
Operating Manual References
1.3.38 Doorphone Call
1.3.80 Room Monitor
To Next Page
Loading...
