EasyManua.ls Logo

Panasonic KX-TA824 - 2.1.4 Manager Programming (Manager only)

Panasonic KX-TA824
178 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1.1 General Features
Feature Manual 139
(3) Ext. (Extension) Shows the number of the extension that was engaged in the
call.
Also shows the following codes:
xxxB: Call answered by the BV feature ( 1.1.8 Built-in Voice
Message (BV))
(xxx=Number of the extension to which the call was directed
before the BV feature answered)
Even if a caller does not leave a voice message, for example,
by going on-hook while hearing a personal/common BV
outgoing message (OGM), the information is logged.
C-xx: Outside-to-Outside (CO-to-CO) line call via the DISA
feature (
1.1.41 Direct Inward System Access (DISA))
(xx=Outside (CO) line number that receives the DISA call)
(4) CO Shows the outside (CO) line number used for the call.
(5) Dial Number [Outside (CO) Line Call]
Outgoing Outside (CO) Line Call
Shows the dialed telephone number (max. 32 digits). Digits
shown are as follows:
0 through 9, , #, - (hyphen)
F/: Flash/recall signal ( 1.1.60 Flash/Recall)
=: Host PBX Access code marker ( 1.1.65 Host PBX Access
Code (Access Code to the Telephone Company from a Host
PBX)) The marker is displayed between the Host PBX Access
code and the dialed number when a Host PBX Access code is
entered.
. (dot): Secret Dialing ( 1.1.111 Secret Dialing)
Incoming Outside (CO) Line Call
Shows <incoming> + the caller's telephone number (max. 16
digits). A caller's telephone number is displayed only when an
optional Caller ID card is installed and "With CID" is selected
in [906] Caller ID SMDR Format. It is also possible to show a
caller's telephone number before the call is answered ( [907]
Caller ID SMDR Printout).
Also shows the following codes:
<DISA incoming> + the caller's telephone number (max. 16
digits): Incoming outside (CO) line call via the DISA feature
<BV incoming>: Incoming outside (CO) line call to the
common message area of the BV feature
<DIL incoming>: Incoming outside (CO) line call via the DIL
feature (
1.1.40 Direct In Line (DIL))
(6) Duration Shows the duration of the outside (CO) line call in hours/
minutes/seconds.
Section Number Data Description

Table of Contents

Other manuals for Panasonic KX-TA824

Related product manuals