1.1 General Features
140 Feature Manual
The following data can be controlled through system programming to adjust whether (or how) they are
printed or displayed by SMDR.
[Programmable Items]
(7) Code Shows the account code appended to the call ( 1.1.2
Account Code Entry), the account code index number (e.g.,
13), the number of the extension that used the Walking COS
feature (e.g., 101), or DISA security code status (e.g., 0).
0: A DISA incoming call without a DISA security code
1 to 4: A DISA incoming call with a DISA security code number
Actual DISA security codes are not printed by SMDR ( [512]
DISA Security Code).
Item Description
Incoming/Outgoing outside
(CO) line call
Controls whether incoming/outgoing outside (CO) line calls are
shown ( [802] Incoming/Outgoing Call Selection for Printing).
If "Toll" is selected for outgoing outside (CO) line calls, only calls that
are checked in [302-305] TRS—COS 2-5 Denied Code and are
allowed, are shown.
Caller's identification Controls whether a caller's telephone number is shown ( [906]
Caller ID SMDR Format). When this is set to display telephone
numbers, even if the PBX receives a caller's name by the Caller ID
feature, only the telephone number is shown.
Secret Dialing Controls whether secret dialing numbers stored in [001] System
Speed Dialing Number or stored in One-touch Dialing button are
shown by SMDR ( [803] Secret Number SMDR Print Suppression).
Account Code Controls whether the account code stored in [310] Account Code or
just the index of the account code is shown ( [805] SMDR Account
Code). The index of the account code is shown when "Verify-All" or
"Verify-Toll" is selected in [605] Account Code Mode.
System programming items Controls whether system programming items that have already been
assigned are shown based on the following parameters ( [804]
System Data Dump):
a) All para: All data
b) System para: All data except for "CO para", "Extn. para",
"DSS para" and "Speed dial"
c) CO para: The data assigned for each outside (CO) line
d) Extn. para: The data assigned for each extension
e) DSS para: The data assigned on the Direct Station
Selection (DSS) buttons and Programmable Feature (PF)
buttons on the DSS Console
f) Speed dial: The System Speed Dialing numbers and
names in [001] System Speed Dialing Number and [011]
System Speed Dialing Name
g) Stop output: Not shown
Section Number Data Description
To Next Page
Loading...
