1.1 General Features
76 Feature Manual
Every extension must belong to one extension group and cannot belong to more than one extension
group.
Assignable Extensions: Proprietary telephones (PTs)/single line telephones (SLTs)
[Example]
2.1. Call Pickup, Group
Using the Call Pickup feature, extensions can answer any calls within the call pickup group to which
they belong.
2.2. Paging—Group
Using the Paging feature, extensions can make a page to any paging group, or answer a page
made to any group.
2.3. Idle Extension Hunting Group
If a called extension is busy, Idle Extension Hunting redirects the incoming call to an idle member
of the same extension group ( [100] Hunting Group Set). When calls are received, idle
extensions are automatically searched for according to a preprogrammed hunting type ( [101]
Hunting Type): Circular Hunting or Terminated Hunting.
2.4. Direct Inward System Access (DISA) Ring Group
A DISA ring group is a specific extension group that receives DISA calls directed to the group. All
extensions in the group assigned as an Automated Attendant (AA) destination ( [501] DISA Built-
in AA) ring simultaneously. To use this feature, "DISA" must be selected as the distribution method
for the desired outside (CO) line port ( [414-416] CO Line Mode—Day/Night/Lunch) and "With
AA" must be selected as the destination of incoming outside (CO) line calls via the DISA feature
( [500] DISA Incoming Call Dial Mode).
Programming Manual References
[PT Programming]
[100] Hunting Group Set
[101] Hunting Type
[414-416] CO Line Mode—Day/Night/Lunch
[500] DISA Incoming Call Dial Mode
[501] DISA Built-in AA
[600] Extension Group
[PC Programming]
9.2.11 Extension Group [2-6]
9.3.1 Line Mode [3-1]—Mode of incoming CO calls—Day, Night, Lunch
9.6.1 Automated Attendant [6-1]—DISA Incoming Call Dial Mode, AA table
Extension Group 1
Extn. 101 Extn. 102
Extension Group 2
Extn. 103 Extn. 104
Extension Group 3
Extn. 105 Extn. 106
Extension Group 4
Extn. 107 Extn. 108
To Next Page
Loading...
