1.1 General Features
82 Feature Manual
2. Feature Numbering (available while a busy tone or DND tone is heard)
Features that are available while a busy tone or DND tone is heard have fixed numbers, as shown in
the following table:
[Feature Numbering Table (available while a busy tone or DND tone is heard)]
3. Feature Numbering (available while dialing or talking)
Features that are available while dialing or talking have fixed numbers, as shown in the following table:
[Feature Numbering Table (available while dialing or talking)]
Remote Maintenance 729
Room Monitor (set/cancel) 735 (1/0) + #
Room Monitor through a doorphone 31 1–4
System Speed Dialing for an SLT (dial) 00–99
The 21st Call Log, Incoming in the Personal
Area Treatment (disregard the newest call/
overwrite the oldest call)
737 (0/1) + #
The 301st Call Log, Incoming in the
Common Area Treatment (disregard the
newest call/overwrite the oldest call)
737 (2/3) + #
Timed Reminder (set/cancel) 76 ([hhmm + parameter]*/2) + #/0
Timed Reminder (confirm) 76 3 + #
Timed Reminder, Remote (set/cancel/
confirm)
764 extn. no. + # + 76 + ([hhmm +
parameter]*/2/3) + #
Time Service (set/cancel) 78 ([1–3]/0) + #
Walking COS
7
extn. password + the user's extn.
no. + #/0
* hh: hour (01–12), mm: minute (00–59), AM/PM (0/1), one time/daily (1/2)
Feature Numbering
Automatic Callback Busy 6
Busy Station Signaling (BSS) 1
Executive Busy Override—Extension/Do Not Disturb (DND) Override 2
Feature Numbering
Alternate Calling—Ring/Voice
Call Retrieving from a Telephone Answering Machine (TAM) 4*
Conference for an SLT 3
Door Open 5
Feature Numbering Additional Number
To Next Page
Loading...
