2.3 Installing Optional Service Cards
Installation Manual 39
4. Attach the 2 extension connectors to the main unit, install the card as shown below, and secure
the 3 extension bolts.
5. Insert the modular plugs of the telephone line cords (2-conductor wiring) into the card's modular
CO ports. (→
2.4.1 Connecting Outside (CO) Lines)
6. Connect the line cords to the terminal board or the modular jacks from the telephone company.
7. Insert the modular plugs of the telephone line cords (2- or 4-conductor wiring) into the card's
modular extension jacks. (→
2.5.1 Connecting Extensions)
8. Wrap the strap around all of the cords. (→ 2.2.4 Securing Cords)
9. Close the covers and secure the screws. (→ 2.2.3 Opening/Closing Covers)
Extension Bolts
Extension Connectors
KX-TA82483
To Next Page
Loading...
