Panasonic KX-TA824 - Page 32

Setting the Handset and Base Unit
32
*
1
When “ Ring On Charger ” is set to on but “ Ringer Volume ” is set to off, the handset rings
at level 1.
*
2
For tone patterns, refer to the user documentation for your PBX.
*
3
The LED turns off when a call is being monitored via Voice Call/Paging/LCS (Hands-free mode)/
Auto Answer/Room Monitor.
Main Item Sub Item Description Setting Default
Adjusts the
ringer volume.
Step Up
Step Down
Level 1-6
Off
Level 3
Selects whether
a tone is heard
from the
attached
headset while
receiving a call.
On
Off
Off
Selects whether
the handset
vibrates while
receiving a call.
Vib.& Ring
Vib.
→ Ring
Off
Off
Selects the
ringing mode
(On or Off) while
a handset is set
on the charger.*
1
On
Off
On
Selects the
ringer pattern for
each type of call.
Bell 1-6
Melody 1-9
Bell 1
Selects the LED
pattern for each
type of call.*
3
Red
Green
Orange
R
→ G→ O
Single Tone:
Red
Double Tone/
Private Ring:
Green
Triple Tone:
Orange
S-Double Tone:
R→ G→ O
Selects the
vibrate pattern
for each type of
call.
Single
Double
Tr i ple
Short Double
Short Triple
Short Term
Continuous
Single
Incoming Option
Ringer Volume
Headset Tone
Vibrate
Ring On Charger
Single Tone
*
2
Double Tone
*
2
Triple Tone
*
2
S-Double Tone
*
2
Private Ring
Category 1-9